Table of Contents
Advertisement
Handle bar height
The height of the handle bars affects the
comfort of the ride. It determines the pressure
on the hands and the position of the back.
Determine your own most comfortable height
by using the bike.
To adjust the handle bar:
1.
Loosen the screw with an Allen wrench a
few turns.
2.
Slide the handle bars to the desired
height and tighten the screw firmly again.
Do not pull out the handle bars further than the
mark. Otherwise the tube will not be deep enough
in the shaft and will risk coming off, which can lead
to serious injuries.
Position handle bars
You can tilt the handle bars. This influences
the distance from the handle bars to the upper
body. Determine your own most comfortable
position by using the bike.
To tilt the handle bars:
1.
Loosen the screws [A] and [B] with an
Allen wrench a few turns.
2.
Place the handle bar in the wanted
position and turn the screws tightly
again.
3.
Turn screw [C] with an Allen wrench a
few turns. Place the handle bar in the
correct position (straight) position and fix
the screws tightly again.
User manual
Tandems 14.10
1.
3.
[A]
1.
2.
MIN INSERT
2.
[C]
[B]
7
Advertisement
Table of Contents
