Vanraam Twinny User Manual page 16

To charge the battery:
For the best performance and to prolong the
life of the battery, we recommend that you
charge the battery at home at room
temperature.
1. Open the little lock by turning the key a
quarter (to the right).
2. Pull the handle forward.
3. Take the battery pack from the holder.
4. Take the battery inside. Plug the charger
into the plug contact of the battery.
5. Connect the charger plug into the socket.
Turn the switch [A] 'on'. A green LED light
on the charger will start to blink fast.
Beware! If the battery is not
connected properly, the green LED
light blinks fast.
6. Depending on the battery level, the
charging time is about 1,5 hour. If the
green LED light stays on, the battery is
fully charged.
7. Once the battery is charged, pull the plug
from the socket first or turn switch [A].
8. Then pull the connector from the battery.
When charging the battery, first connect the charging point and then insert
the plug into the socket!
After being charged, first disconnect the socket and only then remove the
charger from the tricycle!
If a red LED light on the charger starts blinking, remove the plug from the
socket and don't use the charger any more. Contact your dealer.
User manual
Tandems 14.10
1.
2.
5.
3.
4.
[A]
16