Vecow ECS-9200 User Manual page 34

Cat 5/Cat 6 cable. Each PoE connection is powered by Intel
Ethernet controller and independent PCI express interface to connect with multi-
core processor for network and data transmit optimization. Only when PoE port
starts to supply power to power devices, the dedicated LED will be lightened.
PS. Suggest to use PoE function when power input is over 12V.
The pin-outs of LAN 3 to LAN 6 are listed as follows:
Pin No. 10/ 100 Mbps
1
2
3
4
5
6
7
8
Each LAN port is supported by standard RJ-45 connector with LED indicators to
present Active/Link/Speed status of the connection & PoE status LED.
The LED indicator on the right bottom corner lightens in solid green when the
cable is properly connected to a 100 Mbps Ethernet network. The LED indicator
on the right bottom corner lightens in solid orange when the cable is properly
connected to a 1000Mbps Ethernet network. The left LED will keep twinkling/off
when Ethernet data packets are being transmitted/received.
LED Status 10Mbps
Right
Off
Bottom Led
Left Flash
Bottom Led Yellow
POE LED indicator:
LED Location
LAN3
LAN4
LAN5
LAN6
E_TX+
E_TX-
E_RX+
----
-----
E_RX-
-----
------
100Mbps
Solid
Green
Flash
Yellow
LED Color
Green Light: PD installed & powered green
Green
Green Light: PD installed & powered green
Green
Green Light: PD installed & powered green
Green
Green Light: PD installed & powered green
Green
GETTING TO KNOW YOUR ECS-9200/9100 GTX950
1000 Mbps
MDI0_P
MDI0_N
MDI1_P
MDI2_P
MDI2_N
MDI1_N
MDI3_P
MDI3_N
1000Mbps
Solid
Orange
Flash
Yellow
Status
Off: Non PD
Off: Non PD
Off: Non PD
Off: Non PD
®
I210 GigE
PoE
PoE+
PoE+
PoE-
----
----
PoE-
----
----
1 8
27