Maintenance; Battery Replacement; Cleaning And Storage - Extech Instruments EN510 User Manual

Maintenance

Battery Replacement

When the low battery icon
below.
1. Remove power from the meter.
2. Remove the flat head screw that secures the battery compartment at the back of the
meter.
3. Open the battery compartment and replace the three (3) 1.5V 'AAA' batteries observing
correct polarity. Re-assemble the meter before use.
Safety: Please dispose of batteries responsibly; never dispose of batteries in a fire, batteries may
explode or leak. If the meter is not to be used for 60 days or more, remove the batteries and store
separately.
Never dispose of used batteries or rechargeable batteries in household waste.
As consumers, users are legally required to take used batteries to appropriate
collection sites, the retail store where the batteries were purchased, or wherever
batteries are sold.
Disposal: Do not dispose of this instrument in household waste. The user is obligated
to take end-of-life devices to a designated collection point for the disposal of electrical
and electronic equipment.

Cleaning and Storage

Periodically wipe the case with a damp cloth and mild detergent; do not use abrasives or
solvents. Do not allow moisture to come in contact with any of the sensors.
appears on the display please replace the batteries as described
7
EN510-en-GB_V1.0 8/17