Page 1
Model EA33 Introduction Congratulations on your purchase of the Extech EA33 EasyView Light Meter which measures light level (illuminance). This device measures up to 99,990 Fc and 999,990 Lux and stores up to 50 readings for easy recall. Careful use of this meter will provide...
Warranty EXTECH INSTRUMENTS CORPORATION warrants this instrument to be free of defects in parts and workmanship for one year from date of shipment (a six month limited warranty applies on sensors and cables). If it should become necessary to return the instrument for service during or beyond the warranty period, contact the Customer Service Department at (781) 890-7440 ext.
7. The meter will now compute and display the light level for only the desired (primary) light source. ‘LIGHT’ and ‘DH’ (Data Hold) will also appear on the display. 8. Press the ENTER key to exit this mode. EA33 V2.0 06/06...
Page 5
Integral Illuminance is a luminous energy measurement based on the rate of flow of flux (expressed in lumen-seconds). The Model EA33 can also measure any photometric quantity on a time dependent basis. For example, the illuminance could be integrated over time to yield lux-hours (lx-h) or foot candle-hours (fc-h).
Page 6
Illuminance is the amount of visible light incident upon a specific surface area. Since the EA33 sensor area is small, the Average Mode can be used to measure the illuminance of larger surface areas; to accomplish this, up to 99 points can be averaged.
Page 7
2. Use the up/down arrow keys to scroll through the stored readings. 3. Press the ENTER key to exit this mode of operation. AUTO POWER OFF Feature To conserve battery life, the EA33 automatically turns off after several minutes. To defeat this feature: 1. Turn the meter OFF.
Need help?
Do you have a question about the EA33 and is the answer not in the manual?
Questions and answers