Replacing The Lights - Insignia NS-OTR16WH8 User Manual

NS-OTR16WH8(-C)_BS8(-C)_SS8(-C)_17-0277_MAN_V1_ENG.fm Page 18 Tuesday, June 27, 2017 3:46 PM
4 Remove the charcoal filter by pushing it inwards, then lift up and pull it out of the microwave.
5 Insert the new charcoal filter, close the vent grill, and secure with the vent grill screws.
6 Plug the microwave back in or turn the power back on at the main circuit breaker.

Replacing the lights

Surface light (external)
1 Unplug the microwave oven or turn off power at the main circuit breaker.
2 Remove the light cover screws under the microwave.
3 Remove the old light bulbs and replace with new 1.2W LED lights.
4 Reinstall the light cover screws to secure the covers.
5 Plug the microwave back in or turn the power back on at the main circuit breaker.
Microwave light (internal)
1 Unplug the microwave oven or turn off power at the main circuit breaker.
2 Remove the vent grill screws.
3 Pull the vent grill away from the unit.
18
NS-OTR16WH8(-C), NS-OTR16BS8(-C), or NS-OTR16SS8(-C)
www.insigniaproducts.com