Insignia NS-OTR16WH8 User Manual page 17

NS-OTR16WH8(-C)_BS8(-C)_SS8(-C)_17-0277_MAN_V1_ENG.fm Page 17 Tuesday, June 27, 2017 3:46 PM
1 To remove the exhaust filters, slide the filter toward the back of the microwave, then pull it downward while
sliding it out of the side slot. Repeat for the second filter.
2 Soak the ventilation filters in hot water using a mild detergent or wash in a dishwasher. Rinse well and shake to
dry.
3 To reinstall the exhaust filter, slide it into the side slot, then push up and toward the front of the microwave to
secure it. Repeat for the second filter.
Replacing the charcoal filter
The charcoal filter is used in nonvented, recirculated installations. The filter should be changed every 6 to 12 months
depending on use.
1 Unplug the microwave oven or turn off power at the main circuit breaker.
2 Remove the vent grill screws.
3 Pull the vent grill away from the unit.
CAUTION
Do not use ammonia. The aluminum on the filter will corrode and darken.
www.insigniaproducts.com
1.6 Cu. Ft. Over-the-Range Microwave
Surface lights
Ventilation filters
17