Connecting Up The Cables (More Than 16 Video Outputs); Extension To A Maximum Of 240 Video Inputs - Siemens SIMATRIX NEO V2 Configuration Manual

System extensions
8.2.2

Connecting up the cables (more than 16 video outputs)

8.2.3

Extension to a maximum of 240 video inputs

40
Siemens AB
Security Products
Use the label sticker provided to correctly number video inputs 113 to 240 on
1.
the extension bay.
Connect the SysLink socket on the basic unit to the SysLink Input socket on
2.
the extension bay using the Syslink cable (identifiable by Syslink markings).
Unplug all the video input cables from video input 97 onward on the basic unit
3.
and plug them into the same input numbers on the extension bay.
Connect video outputs 1 to 32 on the extension bay to video outputs L1 to
4.
L32 (the two top rows) on the basic unit.
Fig. 25 Circuit diagram for the basic and extension bays
Allocate a number to each additional video input module using the DIP switch
1.
on the module to indicate the sequence of the modules from the bottom
upwards. The bottom module is number 1, the top module number 7.
Video input module DIP switch setting
n.a.
1
2
3
4
5
6
7
Video input module address allocation on the extension bay
Tab. 9
Each module must be inserted in the lowest available slot.
2.
Screw the module to the rear cover of the SIMATRIX NEO.
3.
Video inputs in a 16
video output
configuration
n.a. 113 –128
0001 129 – 144
0010 145 – 160
0011 161 –- 176
0100 177 – 192
0101 193 – 208
0110 209 – 224
0111 224 – 240
Video inputs in a 32
video output
configuration
97 – 112
113 –128
129 – 144
145 – 160
161 –- 176
177 – 192
193 – 208
209 – 224