Programming The Simatrix Neo - Siemens SIMATRIX NEO V2 Configuration Manual

Set-up
7.3

Programming the SIMATRIX NEO

36
Siemens AB
Security Products
SIMATRIX NEO V2 to suit individual operating needs and the rest of the
system.
10. Make a back-up of the parameter settings and store the back-up close to the
system in a safe place.
The SIMATRIX NEO V2 is programmed at the factory to load alarm program 2 as
standard. This program allows alarms to be received and processed immediately.
The keyboards and the IVM- PCs will switch cameras in and out and control
cameras with pan/tilt and lens drives.
To load other data or to change the parameters while the system is running,
proceed as described in the chapter 7.2.