Total system with full options
5.1
Performance characteristics
14
Siemens AB
Security Products
The SIMATRIX NEO V2 video matrix consists of a six standard height unit module
(6HE), which contains both the system controls and the switching matrix.
A maximum of 128 video input signals can be switched at will to a maximum of
32 video outputs (224 video input signals if the extension bay is used).
Video
SIMATRIX NEO, modular 19 inch system
–
Base model:
16 inputs to
–
Full spec. capacity: 224 inputs to
Full spec. capacity: 240 inputs to
Number of inputs extendible in steps of 16
–
Number of outputs extendible in steps of 8
6 standard height unit Matrix Component Tray (MCT), extendible to up to a
maximum of 128 inputs and 32 outputs
Video signal input via BNC sockets
–
75 Ohm terminating resistor can be switched off via a jumper.
Video signal failure monitor
–
Like the SIMATRIX SYS, the SIMATRIX NEO V2 features its own built-in video
monitoring axis. This means that all the outputs remain available, even when
signal monitoring is active.
Control
One 8P8C modular socket (RJ45) for connection to a 10/100 Base-T network,
–
for connection of LAN components, status request via integrated Web server, as
well as parameter setting, integration of central sub-units.
Three serial interfaces (RS232) for the connection of external systems, such as
–
IVM-NT, TELEMAT MD/MTD, SISTORE NT, LMS, programming via a PC and
secondary control system dialling
Connection of up to 8 keyboards with freely programmable keys
–
16 serial CL / TTY interfaces for the connection of telemetry devices (CDCs) for
–
cameras with pan/tilt and lens controls
Connection options for telemetry devices via RS485 interfaces with protocols for
–
CCDA, SCU, Sivis Minidome, Pelco D, PST95 and Molynx-C.
32 alarm inputs in the basic unit, expansion possibility to 255 alarm inputs using
–
extension / alarm boxes.
The software supports a maximum of 8 keyboards with freely programmable
–
keys
CD-ROM with basic program and 6 alarm programs complete with settings, for
–
Windows 98/ME/2000/XP
Preset positions for camera head controls and dome cameras, which can be
–
called up individually or in sequence
Remote programming of digital cameras via CAC0101 (dome converter)
–
8 universal open-collector control outputs for controlling external devices
–
Relay with 2 voltage-free change-over contacts
–
8 outputs
32 outputs (using the extension bay) or
16 outputs (using the extension bay)