Interfaces - Siemens SIMATRIX NEO V2 Configuration Manual

5.4

Interfaces

COM4: RS232 communication interfaces; data exchange
A 1
with external computers or systems
COM2/3: RS232 communication interfaces for data
2
exchange with external computers or systems
3
LAN, not yet supported
SysLink: RS485 system bus for system extension and for
4
connecting the alarm box
5
Alarm out
8 x open-collector outputs and master relay
6
Alarm 1 - 16/ TTY out
For connecting CDCs and detection groups
7
Alarm 17 -32/ TTY out
For connecting CDCs and detection groups
Siemens AB
Security Products
The central processor controls and administers the entire SIMATRIX NEO V2
system with all its video inputs and outputs, detector groups, switch outputs and
interfaces to keyboards, CDCs or an external computer.
The control profile depends on the way system parameters have been set (see the
SIMATRIX NEO V2 programming manual).
Fig. 4 Interfaces on the back of the device
Total system with full options
Telemetry ports 1 – 4: RS422 connections for dome
B
cameras
Keyboard: for connecting up to 8 keyboards
C
Video output 1 Vss /75 Ohm: Video outputs
D
Video input 1 Vss /75 Ohm: Video inputs
E
19