Download  Print this page

Simatrix Neo V2 Connections; Interfaces And Connections - Siemens SIMATRIX NEO V2 Configuration Manual

Hide thumbs

Advertisement

6.1

SIMATRIX NEO V2 connections

6.1.1

Interfaces and connections

Interface
Telemetry port 1
Telemetry port 2
Telemetry port 3
Telemetry port 4
Keyboard:
Expansion
COM2/3, COM4
ALARM 1-16 / TTY out
ALARM 17-32 / TTY out
LAN
SysLink
Alarm out
Electrical supply
Video inputs
Video outputs
Siemens AB
Security Products
Fig. 6
Rear view of the SIMATRIX NEO V2 (base module)
Connection
Connections for dome cameras, 4 x RJ9, RS422 / RS485,
Protocol: CDC (SCU) CCDA, CIVIS, Pelco-D, Molynx
Connections for dome cameras, 4 x RJ9, RS422 / RS485,
Protocol: CDC (SCU) CCDA, CIVIS, Pelco-D, Molynx
Connections for dome cameras, 4 x RJ9, RS422 / RS485,
Protocol: CDC (SCU) CCDA, CIVIS, Pelco-D, Molynx
Connections for dome cameras, 4 x RJ9, RS422 / RS485,
Protocol: CDC (SCU) CCDA, CIVIS, Pelco-D, Molynx
8 RJ12 sockets for connecting keyboards
for future extension options
9-pin Sub-D connectors, RS232 communication interfaces for connecting an external computer
37-pin Sub-D socket with 2 x 8 CL-20mA/TTY interfaces for connecting telemetry devices
Telemetriegeräten (CDC (SCU) protocol) and 2 x 16 alarm inputs for connecting detection groups
not supported, for future network connectability
RJ9 socket for connecting extension bay and the alarm box
25-pin Sub-D connector,8 universal open-collector outputs and relay with two change-over contacts
115 VAC to 230 VAC (+10% / -15%), 50 Hz to 60 Hz, max 250 mA (at 230 VAC) to 500 mA (at 115
VAC), power requirement 55 VA
BNC sockets for video inputs (75  connections, switchable using jumpers)
BNC sockets for video outputs
Installation
23

Advertisement

   Related Manuals for Siemens SIMATRIX NEO V2

Comments to this Manuals

Symbols: 0
Latest comments: