Configuring An Ospf Network (J-Web Procedure) - Juniper EX Series User Manual

Table 69: BGP Global Settings (continued)
Field Function
Import Policy Specifies one or more routing policies to routes being
imported into the routing table from BGP.
Export Policy Specifies one or more policies to routes being
exported from the routing table into BGP.
Trace Options tab
File Name Specifies the name of the file to receive the output
of the tracing operation.
Number of Files Specifies the maximum number of trace files.
File Size Specifies the maximum size for each trace file.
World Readable Specifies whether the trace file can be read by any
user or not.
Flags Specifies the tracing operation to perform.
Related
Documentation

Configuring an OSPF Network (J-Web Procedure)

Copyright © 2017, Juniper Networks, Inc.
Monitoring BGP Routing Information on page 213
Layer 3 Protocols Supported on EX Series Switches
NOTE: This topic applies only to the J-Web Application package.
You can use the J-Web interface to create multiarea OSPF networks on an EX Series
switch.
To configure a multiarea OSPF network:
Chapter 11: Configuring Layer 3 Protocols
Your Action
Click to add an import policy.
Add
Click or to move the selected
Move up Move down
policy up or down the list of policies.
Click to remove an import policy.
Remove
Click to add an export policy.
Add
Click Move up or Move down to move the selected
policy up or down the list of policies.
Click to remove an export policy.
Remove
Type or select and edit the name.
Type or select and edit the value.
Type or select and edit the value.
Select to allow any user to read the file.
True
Select False to disallow all users being able to read
the file.
Select a value from the list.
139