Understanding J-Web Configuration Tools - Juniper EX Series User Manual

J-Web Application Package User Guide for EX Series Switches, Release 14.1X53-A1
Release History Table
Related
Documentation

Understanding J-Web Configuration Tools

28
Release Description
14.1X53-D10 For Junos OS Release 14.1X53-D10 and later, EX3300 switches configured
as a Virtual Chassis display the value 1–10 FPC in the Inventory details
field.
14.1X53-A2 In J-Web Application package Release 14.1X53-A2, you can form a Virtual
Chassis using EX4600 and EX4300 switches.
14.1X53-A2 J-Web is supported on EX4600 switches only in J-Web Application
package Release 14.1X53-A2.
J-Web User Interface for EX Series Switches Overview on page 3
EX2200 Switches Hardware Overview
EX3200 Switches Hardware Overview
EX3300 Switches Hardware Overview
EX4200 Switches Hardware Overview
EX4300 Switches Hardware Overview
EX4500 Switches Hardware Overview
EX6210 Switch Hardware Overview
EX8208 Switch Hardware Overview
EX8216 Switch Hardware Overview
Checking Active Alarms with the J-Web Interface on page 186
XRE200 External Routing Engine Hardware Guide
NOTE: This topic applies only to the J-Web Application package.
The J-Web graphical user interface (GUI) enables you to monitor, configure, troubleshoot,
and manage the switching platform by means of a Web browser with Hypertext Transfer
Protocol (HTTP) or HTTP over Secure Sockets Layer (HTTPS) enabled. The J-Web
interface provides access to all the configuration statements supported by the switch.
The J-Web interface provides three methods for configuring the switch:
Configure menu
Point & Click CLI Editor
CLI Editor
Copyright © 2017, Juniper Networks, Inc.