Rack Installation Instructions
Connecting the Keyboard, Mouse, and Monitor
FortiAnalyzer-2000B Version 4.0 MR1 Rack and Hardware Install Guide
Revision 1
http://docs.fortinet.com/
•
Feedback
Figure 13: Removing the Front Bezel
2
1
4
1
release latch
3
hinge tabs
To install the Front Bezel
1 Insert the hinge tab on the right of the bezel into the slot on the right side of the system
front panel.
2 Rotate the left side of the bezel toward the system.
3 Press the bezel to the system to engage the latch.
Connect the keyboard, mouse, and monitor (optional).
The connectors on the back of your system have icons indicating which cable to plug into
each connector. Be sure to tighten the screws (if any) on the monitor's cable connector.
Connecting the Keyboard, Mouse, and Monitor
3
2
bezel
4
key lock
19