Connecting the Keyboard, Mouse, and Monitor
Connecting the Keyboard, Mouse, and Monitor
20
Figure 15: Removing the Front Bezel
2
1
4
1
release latch
3
hinge tabs
To install the Front Bezel
1 Insert the hinge tab on the right of the bezel into the slot on the right side of the system
front panel.
2 Rotate the left side of the bezel toward the system.
3 Press the bezel to the system to engage the latch.
Figure 16: Connecting the keyboard, mouse, and monitor
Connect the keyboard, mouse, and monitor (optional).
The connectors on the back of your system have icons indicating which cable to plug into
each connector. Be sure to tighten the screws (if any) on the monitor's cable connector.
3
2
bezel
4
key lock
FortiManager-1000C™ Version 4.0 Rack and Hardware Install Guide
Rack Installation Instructions
02-40000-112634-20091026
http://docs.fortinet.com/
•
Feedback