Making Recordings Making An Audio Or A Video Recording - Pioneer VSX-D814 Operating Instructions Manual

Audio/video multi-channel receiver
Hide thumbs Also See for VSX-D814:
Table of Contents

Advertisement

09
Making recordings
Chapter 9:
Making recordings
Making an audio or a video
recording
You can make an audio or a video recording
from the built-in tuner, or from an audio or
video source connected to the receiver (such
as a CD player or TV).
Keep in mind you can't make a digital
recording from an analog source or vice-
versa, so make sure the components you are
recording to/from are hooked up in the same
way (see Connecting up on page 16 for more
on connections).
If you want to record a video source, you also
need to use the same type of connection for
the source as for the recorder. For example,
you can't record a component hooked up to S-
video jacks with a recorder hooked up to the
component video outputs (see page 19 for
more on video connections).
STATION
TUNER EDIT
CLASS
BAND
MULTI JOG
1
Select the source you want to record.
Use the MULTI CONTROL buttons (or INPUT
SELECT).
56
En
INPUT
RECEIVER
SOURCE
SELECT
DVD/LD
TV/SAT
DVR/VCR
TV CONT
MULTI CONTROL
CD
CD-R/TAPE
TUNER
RECEIVER
ADVANCED
STEREO/
SIGNAL
MIDNIGHT/
SB CH
TUNING
STANDARD
SURROUND
DIRECT
SELECT
LOUDNESS
SPEAKERS
MODE
LISTENING MODE
VIDEO INPUT
MCACC
SETUP MIC
DIGITAL IN
S-VIDEO
VIDEO
MPX
INPUT ATT FL DIMMER
2
Select the input signal (if necessary).
Press SIGNAL SELECT on the front panel to
select the input signal corresponding to the
source component (see page 37 for more on
this).
3
Prepare the source you want to record.
Tune to the radio station, load the CD, video,
DVD etc.
4
Prepare the recorder.
Insert a blank tape, MD, video etc. into the
recording device and set the recording levels.
Refer to the instructions that came with the
recorder if you are unsure how to do this.
Most video recorders set the audio recording
level automatically—check the component's
instruction manual if you're unsure.
5
Start recording, then start playback of
the source component.
• The receiver's volume, balance, tone
(bass, treble, loudness), and surround
effects have no effect on the recorded
signal.
MULTI JOG
TONE
QUICK SETUP
L AUDIO R

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents