Pioneer VSX-D814 Operating Instructions Manual page 33

Controls and displays
The following DVR controls can be accessed
by pressing SHIFT:
REC
Starts recording.
REC STOP
Stops recording.
HDD/DVD
These buttons switch between the hard
disk and DVD controls for DVD/HDD
recorders.
9 RECEIVER CONTROL buttons
STANDARD
Press for Standard decoding and to
switch between the various Pro Logic IIx
and Neo:6 options (page 35).
ADV. SURR.
Use to switch between the various
surround modes (page 35).
STEREO
Switches between direct and stereo play-
back. Direct playback bypasses the tone
controls and channel levels for the most
accurate reproduction of a source
(page 36).
SLEEP
Use to put the receiver in sleep mode and
select the amount of time before the
receiver turns off (page 41).
MIDNIGHT/LOUDNESS
Switches to Midnight or Loudness
listening (page 40).
TEST TONE
Sounds the test tone when setting up the
surround sound of the receiver (page 50).
CH SELECT
Selects a speaker when setting up the
surround sound of the receiver (page 50).
LEVEL +/–
Adjusts the levels of the surround sound
of the receiver (page 50).
EFFECT +/–
Adds or subtracts the amount of effect
with different advanced surround modes
(page 35).
10 SHIFT
Press to access the DVR controls above the
component control butttons.
11 SOURCE
Press to turn on/off other components
connected to the receiver.
12 Character display (LCD)
This display shows preset codes and other
information when transmitting control
signals.
The following commands are shown when
you're setting the remote to control other
components (see Controlling the rest of your
system on page 57):
SETUP
Indicates the setup mode, from which you
choose the options below.
PRESET
See Selecting preset codes directly on
page 57.
LEARN (VSX-D914 model only)
See Programming signals from other
remote controls on page 58.
DIRECT F
See Direct function on page 60.
ERASE (VSX-D914 model only)
See Erasing one of the remote control
button settings on page 59.
RESET
See Erasing all of the remote control
presets on page 60.
READ ID
See Confirming preset codes on page 60.
05
33
En