System Off - Pioneer VSX-D2011-G Operating Instructions Manual

Using Other Functions

SYSTEM OFF

The SYSTEM OFF feature allows you to tell the receiver and your other components to stop and/or turn off with
the push of only one button on the remote control. For example, you can program the unit to stop your DVD,
turn off your TV and turn off your DVD player. You don't need to program power off for PIONEER components,
they will go off automatically in this mode. The receiver itself will go off automatically as well.
The steps below show you how to program a string of up to 5 different SYSTEM OFF operations.
Be sure to set up each component before programming the SYSTEM OFF function (see "Setting
memo
Up the Remote Control to Control Other Components", pages 66-69).
S0URCE
DVD/LD
5
MULTI CONTROL
VCR2
CD-R/
TAPE1
DIMMER LOUDNESS
1
SIGNAL SEL
5
VIDEO SEL
9
SYSTEM SETUP
MENU
2-4 TUNER EDIT
AUDIO
MPX
8-9
¶
–
TUNING
1
–
STATION
4
–
CHANNEL
TV CONTROL
TV VOL
TV CH
MOVIE
MODE
STEREO/
DIRECT
memo
• To exit from the REMOTE SETUP mode at
anytime press the REMOTE SETUP button.
• The display will disappear after one minute or
so if no new commands are entered. Press any
button to wake up the remote and continue the
process.
82
En
SETUP
TV SYSTEM RECEIVER
OFF
VCR1/
TV/SAT TV CONT
DVR
MULTI
VIDEO CD
OPERATION
MD/
TUNER RECEIVER
TAPE2
TONE EFFECT/CH SEL
2 3 4
+
DNR BASS/TREBLE
6 7 8
–
+
HI-BIT 10 DISC
0
ENTER
DIRECT ACCESS SEARCH MODE
GUIDE
TOP MENU
6
TRACK
ENTER
EXIT
RETURN
Buttons that
TEXT ON RF ATT DISP MODE
8
SUB TITLE
can be
+
BAND TUNING
3 ¡
programmed
+
TEXT OFF CLASS STATION
7 ¢
with do
+
CHANNEL
SYSTEM
TV INPUT INPUT
OFF Opera-
MIDNIGHT VOLUME
tions
MULTI CH
INPUT
ACOUSTIC
MUSIC MUTE
EQ
SURROUND
REMOTE
1
SETUP
SB CH
ENTER
MODE
Î
1 Press the REMOTE SETUP button for
more than three seconds.
The REMOTE SETUP menu appears on the remote
display.
2 Use the 5∞ buttons to select SYS
OFF and press ENTER.
SYSTEM OFF appears in the remote display.
3 Use the 5∞ buttons to select first
command. "1st Cmmnd" appears in
the display. Press ENTER.
This tells the receiver this will be the first command.
To erase a command
Select CLEAR and press ENTER. Then go to step 7.
To go back one step
Select EXIT and press ENTER.
4 To setup a command select CHANGE
and press ENTER.
FUNCTION flashes in the display,
5 Select the component whose
command you want to input (for
example, a DVD player), and press
the MULTI CONTROL button for it.
KEY will flash in the display.
6 Select a button for the command you
want to input (for example, 7 [stop]).
COMPLETE appears in the display.
7 Repeat steps 3-6 to program a
sequence of up to five commands.
You can assign SYSTEM OFF information for up to 5
commands.
8 When done select EXIT and press
ENTER.
You will return to the REMOTE SETUP menu.
9 Select EXIT and press ENTER again.
You will exit the REMOTE SETUP menu and return to
normal operation.