Pioneer VSX-D2011-G Operating Instructions Manual page 67

SETUP
S0URCE TV SYSTEM RECEIVER
OFF
VCR1/
DVD/LD TV/SAT
DVR
MULTI CONTROL
VCR2 VIDEO CD
CD-R/ MD/
TUNER
TAPE1 TAPE2
DIMMER LOUDNESS TONE EFFECT/CH SEL
1 2 3
SIGNAL SEL DNR BASS/TREBLE
5 6 7
+
VIDEO SEL HI-BIT 10
9 0
DIRECT ACCESS SEARCH MODE
SYSTEM SETUP
MENU
6-9
TUNER EDIT
ENTER
AUDIO
MPX
TEXT ON RF ATT DISP MODE
¶ 8
SUB TITLE
–
TUNING BAND TUNING
1 3
–
STATION TEXT OFF CLASS STATION
4 7
–
CHANNEL CHANNEL
TV INPUT INPUT
TV CONTROL
TV VOL MIDNIGHT VOLUME
TV CH
MULTI CH
INPUT
ACOUSTIC
MOVIE MUSIC
EQ
MODE
SURROUND
SB CH
STEREO/
ENTER
DIRECT MODE
6 Point the remote control at the
component you want set and press
ENTER.
OK? will appear in the remote control display.
If the component you are trying to control turns on/off you
TV CONT
have set it correctly. Use the 5∞ buttons to select YES and
MULTI
OPERATION go on to step 7.
RECEIVER
If the component you are trying to control does not turn on/
4
+
off the correct preset code has not been selected. In this
8
– case, use the 5∞ buttons to select NO, press ENTER and
DISC
ENTER
go back to step 5. Try another preset code for that maker. (If
GUIDE
TOP MENU
the component you are trying to setup doesn't have a
TRACK
EXIT standby/on mode it won't turn on even if the correct preset
RETURN
code is entered. In this case select YES and go on to step
7.)
+
¡
+
¢
If you can't seem to get the component you are trying to
+
set to turn on or off you can still set up your remote control
by using the LEARNING mode (on the next page).
7 Press ENTER. The preset code has been
MUTE
entered.
REMOTE
SETUP
COMPLETE will appear in the display.
Î
Naturally it's easiest and most logical to assign the button
that has the same name as the component you are setting
up (for example, choose the DVD/LD button for your DVD
player).
You may find you have components which do not corre-
spond to the name on any MULTI CONTROL button (for
example a cable TV tuner) or you have two components
where only one button is provided (for example, CD-R/TAPE
1). In this case, use step 3 to assign any available MULTI
CONTROL button to the component you want to remote
control.
For example, you may have both a CD-R and a tape deck in
your system but only one video deck. It would make sense
to assign the CD-R/TAPE 1 MULTI CONTROL button to the
CD-R and the VCR 2 MULTI CONTROL button to your tape
deck. To do this choose VCR 2 in step 3 when you want to
set up the tape deck. Then choose TAPE in step 4 and
proceed as above. The only practical difference in this
method is that you have to remember the VCR 2 MULTI
CONTROL button is actually your tape deck.
In this case, you would need to hook up your tape deck to
the input jacks marked VCR 2 on the back of the receiver.
This method should help you customize the remote control
for your system and let you control all of your components
with the remote control for the VSX-D2011.
8 Repeat the process from step 2 for all of
your components.
9 Select EXIT and press ENTER.
Remote Control of Other Components
67
En