Surrback System (Surround Back System) - Pioneer VSX-D2011-G Operating Instructions Manual

SURRBACK SYSTEM (Surround Back System)

This setup selects how your surround back system will be used. If you want to use it for surround back speakers
in your main speaker system choose NORMAL SYSTEM. In this case you won't have any B (or secondary)
speaker system as these speakers fill that role also for the VSX-D2011. If you want to use your surround back
speakers in a different room choose SECOND ZONE. Alternatively, you can choose the FRONT BI-AMP setting,
in order to deliver more power to the front speakers. If starting fresh, complete steps 1-3 in page 36.
1 2 3
+
SIGNAL SEL DNR BASS/TREBLE
5 6 7
–
+
VIDEO SEL HI-BIT 10
9 0
DIRECT ACCESS SEARCH MODE
SYSTEM SETUP
MENU
TUNER EDIT
ENTER
AUDIO
MPX
TEXT ON RF ATT DISP MODE
¶ 8
SUB TITLE
–
TUNING BAND TUNING
1 3 ¡
1-3
STANDBY/ON
STANDBY
MOVIE MUSIC ENTER
MULTI JOG
MULTI JOG CONTROL
SET UP RETURN
PHONES
SPEAKERS
1
1.Surround Setup
[ SurrBack System
[ Auto Setting
[ Quick
[ Normal
[ Expert
[ Exit
2
SurrBack System
[ Normal System ]
[ Secound Zone ]
[ Front Bi-Amp ]
[ Exit ]
3
SurrBack System
[ Normal System ]
[ Secound Zone ]
[ Front Bi-Amp ]
[ Exit ]
4
1 SURRBACK SYSTEM should be
8
DISC
ENTER
GUIDE
TOP MENU
1-3
TRACK
EXIT
RETURN
2 Use the 5∞ buttons to select the
+
SIGNAL HI-BIT SB CH
SELECT HI-SAMPLING MODE BAND
TONE CONTROL
TONE BASS/TREBLE
3 EXIT should be selected. Press the
]
]
]
]
]
]
Setting Up for Surround Sound
selected. If it isn't use the 5∞ buttons
to select it. Press the ENTER button.
The setup possibilities appear on your TV.
surround back system setting. Press
the ENTER button.
Choose from:
NORMAL SYSTEM: if you want to use these speaker
terminals for your surround back speakers in your main
speaker system (referred to as the A speaker system).
SECOND ZONE: if you want to use the these speaker
terminals for an independent speaker system (referred to
as speaker system B).
FRONT BI-AMP: Choose this setting if you want to deliver
more power to your front speakers. This setting will use
your surround back speaker terminals so you will only be
able to get 5.1 channel playback. Also, you will have to bi-
wire your speakers to do this (see page 74).
ENTER button.
You will return to the SURROUND SETUP menu display.
Next, proceed to either AUTO SETTING (see page 13),
QUICK (on the next page) or NORMAL (see page 39).
If you want to change a setting before proceeding
start over from step 1.
37
En