Pioneer VSX-D2011-G Operating Instructions Manual page 101

7
Center EQ
[ + ]
63Hz
2. 0dB
+
[ ]
125Hz 2. 5dB
-
250Hz [ ]
4. 0dB
-
4 kHz [ ]
5. 5dB
+
11.3 kHz [ ]
0. 5dB
+
[ ]
TRIM 1. 0dB
[Exit]
9
Center EQ
+
63Hz [ ]
2. 0dB
+
125Hz [ ]
2. 5dB
-
250Hz [ ]
4. 0dB
-
[ ]
4 kHz 5. 5dB
+
11.3 kHz [ ]
0. 5dB
+
TRIM [ ]
0. 0dB
[Exit ]
1
Acoustic Cal EQ
[ CUSTOM1 ADJUST
[ CUSTOM2 ADJUST
[ DATA COPY
[
DATA CHECK
[Exit
2
Acoustic Cal EQ
[ ]
ALL CH ADJUST
[ FRONT ALIGN ]
[Exit ]
3
ALL CH ADJUST
[ Front L EQ ]
[ ]
Center EQ
[ ]
Front EQ
R
[ Surround EQ ]
R
[ SurrBack EQ ]
R
[ ]
SurrBack EQ
L
[ ]
Surround EQ
L
[Exit ]
4
Center EQ
+
63Hz [ ]
1. 5dB
+
[ ]
125Hz 2. 5dB
-
250Hz [ ]
4. 0dB
-
4 kHz [ ]
5. 5dB
+
11.3 kHz [ ]
0. 5dB
[ + ]
TRIM
0. 0dB
[Exit]
7 TRIM should be selected (if it isn't use the
5∞ buttons to select it) and press ENTER.
8 Use the 5∞ buttons to adjust the TRIM
and press ENTER.
TRIM will balance the volume level of each frequency in the
overall volume of that speaker.
9 EXIT should be selected (if it isn't use the
5∞ buttons to select it) and press ENTER.
10 The cursor automatically goes to the next
channel. Press ENTER and repeat steps 3
– 8 to adjust all the channels.
11 EXIT should be selected (if it isn't use the
5∞ buttons to select it) and press ENTER.
Leave the setup by using the 5∞ buttons to select EXIT and
pressing ENTER. You can now go to DATA CHECK or leave the
ACOUSTIC CAL EQ setting by using the 5∞ buttons to select
EXIT and pressing ENTER.
To use the DATA CHECK feature follow the steps here.
]
1 Use the 5∞ buttons to select DATA
]
]
]
CHECK. Press ENTER.
]
2 Select either ALL CH ADJUST or FRONT
ALIGN as the data you want to check.
Press ENTER.
3 Use the 5∞ buttons to select the channel
that you want to check. Press ENTER.
That channel appears so you can check the setting.
4 When that channel has been checked, use
the 5∞ buttons to select the EXIT and
press ENTER.
5 Repeat step 3 & 4 to check all the
channels.
6 When all channels have been checked
select EXIT (if it's not already selected)
and press ENTER.
Leave the setup by using the 5∞ buttons to select EXIT and
pressing ENTER. You can now go to another ACOUSTIC CAL
EQ setting by using the 5∞ buttons and pressing ENTER.
Fine Tuning Your System
101
En