Expert Setup - Pioneer VSX-D2011-G Operating Instructions Manual

Expert Setup

The settings here can only be done if you've performed the more basic preliminary setups. Thus, before doing
these settings do either AUTO setup (page 13–15), QUICK setup (page 38) or NORMAL setup (page 39-43).
These settings are to further heighten your surround sound. They are not absolutely necessary but may give
more defined and enjoyable surround sound. You can decide if you want to make these settings or not. You only
need to make these settings once (unless you change the placement of your current speaker system, add new
speakers or components to your system, etc.). These setup operations use your TV to display the settings and
choices so be sure your TV and receiver are properly hooked up.
button on the remote control to navigate the OSDs on your TV. Conversely, you can use the MULTI JOG
dial and ENTER button, and look at the display, on the Front Panel.
VCR1/
DVD/LD TV/SAT
DVR
MULTI CONTROL
VCR2 VIDEO CD
CD-R/ MD/
TUNER
TAPE1 TAPE2
DIMMER LOUDNESS TONE
1 2 3
SIGNAL SEL DNR BASS/TREBLE
5 6 7
+
VIDEO SEL HI-BIT 10
9 0
DIRECT ACCESS SEARCH MODE
2
SYSTEM SETUP
MENU
TUNER EDIT
ENTER
AUDIO
MPX
TEXT ON RF ATT
¶ 8
3-5 2
STANDBY/ON
STANDBY
MOVIE MUSIC ENTER
MULTI JOG
MULTI JOG CONTROL
SET UP
PHONES
3
System Setup
[1. Surround Setup
[2. THX CINEMA Setup
[3. Input Assign
[4. Function Rename
[5. PHONO/LINE Setup
[Exit
4
1.Surround Setup
[ SurrBack System ]
[ Auto Setting
[ Quick
[ Normal
[ Expert
[ Exit
5
Expert
[Crossover Network
[Fine Channel Level ]
[Fine Channel Delay ]
[Acoustic Cal EQ
[Bass Peak Level
[D-Range Control
[Exit
TV CONT
MULTI
OPERATION
1
RECEIVER
EFFECT/CH SEL
4
+
8
–
DISC
ENTER
GUIDE
TOP MENU
3-5
TRACK
EXIT
RETURN
DISP MODE
SUB TITLE
SIGNAL HI-BIT SB CH
BAND
RETURN SELECT HI-SAMPLING MODE
TONE CONTROL
SPEAKERS TONE BASS/TREBLE
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
Fine Tuning Your System
Use the arrow buttons (5∞) and the ENTER
1 Turn on the receiver and your TV,
press RECEIVER on the remote
control.
Make sure your TV is set to the receiver.
2 Press the SYSTEM SETUP button.
The menu possibilities appear on your TV.
3 SURROUND SETUP should be
selected (if it's not use the 5∞
buttons to select it). Press the
ENTER button.
4 Select EXPERT with the 5∞ buttons.
Press the ENTER button.
5 Follow the order below to make
expert settings. Use the 5∞ buttons
to navigate through the menus.
When you have the setting you want
in particular menu, press ENTER.
In each mode, the current settings are displayed on
the screen.
CROSSOVER NETWORK (page 96)
This feature determines which frequencies will be sent
to the subwoofer (or large speakers).
FINE CHANNEL LEVEL (page 97)
This feature balances the sound output level of your
speakers more finely than in the NORMAL setup.
FINE CHANNEL DELAY (page 98)
This feature adjusts the delay level of your speakers
more finely than in the NORMAL setup.
ACOUSTIC CAL EQ (pages 99–101)
This feature allows you to adjust the amount of a
certain frequency in a soundtrack, acting as a kind of
room equalizer for your speakers.
BASS PEAK LEVEL (page 102)
Dolby Digital and DTS audio sources include ultra-low
bass tones. Set the bass peak level as needed to
prevent the ultra-low bass tones from distorting the
sound from the speakers.
DYNAMIC RANGE CONTROL (page 103)
This feature makes possible excellent surround sound
effects when listening to Dolby Digital and DTS
sources at low volumes.
95
En