Remote Control; Audio Button - Pioneer Elite VSX-43TX Operating Instructions Manual

Displays & Controls

Remote Control

This page describes the buttons on the remote control used to operate the receiver.
RECEIVER
1
2
DVD/LD
VCR 2
MOVIE
3
STEREO/
DIRECT
MENU
4
SYSTEM
SETUP
AUDIO
5
CHANNEL
6
DIMMER
SIGNAL SEL
7
VIDEO SEL
8
1
RECEIVER (STANDBY/ON) button
Press to turn power of the receiver on or to
standby (off).
2 MULTI CONTROL buttons
These buttons are the basic controls that
switch the mode of the receiver and the
remote control, which allows you to control
your other components.
TV CONT: Press so that the remote control can
operate the TV control commands.
3 Listening mode buttons (see page 43-
45)
SURROUND buttons (MOVIE, MUSIC, |
& ENTER):
MOVIE: Press to put the receiver into MOVIE
listening mode (see page 44).
MUSIC: Press to put the receiver into MUSIC
listening mode (see page 45).
30
| | | | \ \ \ \ \ : Use to select the MOVIE or MUSIC
|
listening mode.
9
0
SOURCE
MULTI SYSTEM
OPERATION OFF
-
MULTI CONTROL
TV / SAT VCR/DVR TV CONT
=
C D
TUNER RECEIVER
ACOUSTIC
MUSIC
INPUT
EQ
SURROUND MULTI CH ~
SB CH
MODE INPUT
MODE
ENTER MIDNIGHT
MUTE
MASTER
VOLUME
!
TUNER EDIT TOP MENU
@
TUNE
GUIDE
ST ST
#
ENTER
RETURN
TUNE
$
DTV ON/OFF BAND CHANNEL
D.ACCESS MPX CLASS
LOUDNESS TONE EFFECT/CH SEL
ENTER
DNR BASS/TREBLE DISC
10
HI-BIT
TV CONTROL
SUB TITLE
%
CHANNEL VOLUME REMOTE
SETUP
^
RECEIVER
ENTER: Use this button to enter information
concerning the listening modes.
STEREO/DIRECT: Switches the receiver into
STEREO mode if it was in a different listening
mode or toggles between DIRECT and STE-
REO mode (see page 43).
4 SYSTEM SET UP button
Use for all system setups, including the
speaker and sound systems. For more informa-
tion see. "Setting up for Surround Sound"
starting on page 34. When in TUNER control
mode this functions as TUNER EDIT, and in
DVD control mode, MENU functions.

5 AUDIO button

Use to switch the audio tracks of a DVD when
in DVD mode.
6 Command button for other components
(see pages 61–62)
Use these buttons to control other components
you selected with the MULTI CONTROL
buttons. You must input the preset code in
order use this function (see page 59).
7 Number buttons
These can be used for many purposes depend-
ing on the mode of the remote control.
When the RECEIVER button is pressed, you
enter the receiver mode and the buttons
operate as below:
DIMMER (see page 53)
Use to adjust the brightness of the receiver's
display.
LOUDNESS button (see page 48)
Switches the LOUDNESS mode on or off (for
all modes except THX CINEMA and MULTI CH
IN).
TONE buttons (see page 49)
This button switches between TONE ON and
TONE BYPASS, which bypasses the tone
circuitry.
SIGNAL SEL button (see page 42)
Press SIGNAL SEL repeatedly to select one of
the following:
AUTO – If there are analog and digital signals
| | \ | | \ \ \ \
input, the receiver automatically selects the
digital signal.
DIGITAL – To select an optical or coaxial
digital signal.
ANALOG – To select an analog signal.