Pioneer Elite VSX-43TX Operating Instructions Manual page 29

9 MULTI CH IN button
Use this button to select the component you
have hooked up to the MULTI CH IN terminals
(for example, a DVD-Audio player).
10 ACOUSTIC EQ button (see page 47)
Use to switch on and off the Acoustic Calibra-
tion EQ.
11 MASTER VOLUME dial
Use to raise or lower the volume of the receiver.
12 MULTI JOG CONTROL buttons
SET UP
Press to switch the SYSTEM SETUP mode.
RETURN
Press to move back one step in the SYSTEM
SETUP process.
13 SIGNAL SELECT button (see page 42)
Press SIGNAL SELECT repeatedly to select one
of the following:
AUTO – If there are analog and digital signals
input, the receiver automatically selects the
digital signal.
DIGITAL – To select an optical or coaxial
digital signal.
ANALOG – To select an analog signal.
14 HI-BIT HI-SAMPLING button (see page
50)
Use this button to switch the HI-BIT
HI-SAMPLING on or off. Use to hear CD and
DVD, as well as other digital soundtracks at a
wider dynamic range, allowing for finer audio
reproduction.
15 SB CH MODE button (see pages 51)
Use this button to turn the surround back
channels ON/OFF/AUTO or switch the VIRTU-
AL SURROUND BACK mode between ON/
OFF/AUTO.
16 MIDNIGHT button (See page 48)
Switches the MIDNIGHT mode on or off
(cannot be used in THX CINEMA mode).
17 LOUDNESS button (see page 48)
Switches the LOUDNESS mode on or off (for
all modes except THX CINEMA and MULTI CH
IN).
Displays & Controls
18 TUNER CONTROL buttons (See page
54-58)
BAND
Press to select the AM or FM band.
CLASS
Press repeatedly to switch the preset station
classes.
SELECT
Switches the –/+ buttons between station
memory and frequency select modes.
–/+
Selects station memories or frequencies when
using the tuner.
TUNER EDIT
Press to memorize and name a station for recall
using the MULTI JOG and ENTER buttons.
19 PHONES jack
Connect headphones for private listening (no
sound will be heard through the speakers).
20 SPEAKERS (A/B) button
The use of this button depends on how the
SURRBACK SYSTEM (see page 35) are set. If
NORMAL SYSTEM is chosen this button
toggles between A and OFF. If SECOND ZONE
is chosen this button toggles between A, B,
A+B and OFF (see page 66). If FRONT BI-AMP
is chosen this button toggles between A+B and
OFF (see page 66).
21 TONE CONTROL buttons (see page 49)
TONE button
This button switches between TONE ON and
TONE BYPASS, which bypasses the tone
circuitry.
BASS/TREBLE button
Use to select whether the bass or treble will be
adjusted.
–/+ buttons
Use to adjust the frequency levels.
22 VIDEO INPUT jacks (see page 17)
S-VIDEO
Video input for connecting a portable DVD
player, video camera (etc.), that has an S video
out.
RCA VIDEO / AUDIO (L/R)
Video input for connecting a portable DVD
player, video camera, etc., that has standard
RCA video/audio outputs.
29