Using System Off; The Pioneer Sr System: Operating Other Pioneer Components - Pioneer Elite VSX-43TX Operating Instructions Manual

Using SYSTEM OFF

Do the following to use the SYSTEM OFF function.
The SYSTEM OFF feature allows you to tell the receiver and your other components to stop and/or turn off with
the remote control. Most Pioneer components will automatically turn off. The receiver itself will go off
automatically as well.
The following Pioneer components can be turned off using the SYSTEM OFF function:
DVD, DVD-Recorder, LD, CATV, CD, CD-R, MD, Satellite Tuner, Tape, Tuner, VCR, and TV.
• Be sure to set up each component before programming multi operations (see "Setting Up the
memo
Remote Control to Control Other Components", pages 59–60).
• To exit from the REMOTE SETUP mode at anytime press the REMOTE SETUP button.
RECEIVER
MULTI SYSTEM
OPERATION OFF
MULTI CONTROL
DVD/LD TV / SAT VCR/DVR
C D TUNER
VCR 2
ACOUSTIC
MOVIE MUSIC
EQ
SURROUND SB CH
MODE
MODE
STEREO/
ENTER
DIRECT MIDNIGHT
The PIONEER SR System: Operating other PIONEER
components
Connecting an optional control cord allows you to operate other PIONEER components simply by pointing the
receiver's remote control at the remote sensor on the front panel of the receiver. The receiver then sends the
remote control signals to the other devices via the CONTROL OUT terminal.
Receiver
Remote Control
memo
• You can also control PIONEER components (and those made by other manufacturers) by pointing the
receiver's remote control directly at the respective component. This type of operation does not re-
quire control cords. All you have to do is recall the appropriate stored settings (see page 59).
• If you use a remote control hooked up via the CONTROL IN jack with a control cord, you won't be able
to use this unit's remote control.
• If you use this feature make sure an analog (audio and/or video) connection has been made between
the units.
1 Press the MULTI OPERATION button
1
SOURCE
TV CONT
1
RECEIVER
INPUT
MULTI CH
INPUT
MUTE
IN
CONTROL
OUT
PIONEER component
with an CONTROL
RECEIVER SOURCE
MULTI SYSTEM
OPERATION OFF
MULTI CONTROL
DVD/LD TV / SAT VCR/DVR TV CONT
VCR 2 C D TUNER RECEIVER
ACOUSTIC
MOVIE MUSIC EQ INPUT
terminals.
SURROUND SB CH MULTI CH
MODE MODE INPUT
STEREO/
DIRECT ENTER MIDNIGHT
MUTE
MASTER
VOLUME
MENU TUNER EDIT TOP MENU
TUNE
SYSTEM GUIDE
SETUP
ST ST
ENTER
AUDIO RETURN
TUNE
CHANNEL - DTV ON/OFF BAND CHANNEL +
RF ATT D.ACCESS MPX CLASS
DIMMER LOUDNESS TONE EFFECT/CH SEL
ENTER
SIGNAL SEL DNR BASS/TREBLE DISC
+ - + 10
VIDEO SEL HI-BIT
TV CONTROL SUB TITLE
CHANNEL VOLUME REMOTE
SETUP
RECEIVER
Using Other Functions
and within 5 seconds press the
RECEIVER button.
All the Pioneer components connected to the receiver
and the receiver will stop and/or go off.
CONTROL
IN
OUT
To CONTROL IN
terminal of another
PIONEER component
with an CONTROL
terminals.
71