Dynamic Range Control - Pioneer Elite VSX-43TX Operating Instructions Manual

DYNAMIC RANGE CONTROL

This feature makes it possible to enjoy full surround sound effects on Dolby Digital and DTS sources even at low
volumes. It does this by compressing the dynamic range. Dynamic range is the difference between the loudest
and the softest sounds in any given signal. Compressing the range plays sounds so the quieter ones are audible
and the louder ones don't get distorted or become overpowering. This feature only applies to Dolby Digital and
DTS sources but the MIDNIGHT mode (explained on page 48) accomplishes the same end for a variety of
sources. If continuing from BASS PEAK LEVEL, DYNAMIC RANGE CONTROL should be selected.
MASTER
VOLUME
MENU TUNER EDIT
TUNE
SYSTEM
SETUP
ST
ENTER
AUDIO
TUNE
CHANNEL DTV ON/OFF BAND
D.ACCESS
1-6
STANDBY/ON
STANDBY
MOVIE MUSIC ENTER
MULTI JOG
Follow steps 1-5 on page 79, if necessary, to get
to the starting point mentioned here.
1 D-RANGE CTRL should be
selected, if it isn't use the 5∞
buttons to select it. Press ENTER.
SIGNAL PRO LOGIC Neo :6 LOUDNESS MIDNIGHT TONE DNR
AUTO DIGITAL
RF DTS ES EX
MPEG AAC
DIGITAL
ANALOG STEREO
DSP
SB CH
ON MOVIE
AUTO
OFF MUSIC
L C R LFE
L S R
S S SP A B
2 Use the 5∞ buttons to choose
either OFF, MID or MAX. Press
ENTER.
SIGNAL PRO LOGIC Neo :6 LOUDNESS MIDNIGHT TONE DNR
AUTO DIGITAL
RF DTS ES EX
MPEG AAC
DIGITAL
ANALOG STEREO
DSP
SB CH
ON MOVIE
AUTO
MUSIC
OFF
L C R LFE
L S R
S S SP A B
OFF: No Dynamic Range Control.
MID: A moderate amount of Dynamic Range
Control.
MAX: The most Dynamic Range Control available
is applied.
TOP MENU
GUIDE
1-6
ST
RETURN
CHANNEL
MPX CLASS
MULTI JOG CONTROL SIGNAL HI-BIT SB CH
SET UP RETURN SELECT HI-SAMPLING MODE MIDNIGHT LOUDNESS BAND
PHONES TONE CONTROL
SPEAKERS TONE BASS/TREBLE
ATT STEREO MONO
dB
TUNED RF ATT
RDS EON
Hi-BIT/
SAMPLING
MULTI-ROOM
ATT STEREO MONO
dB
TUNED RF ATT
RDS EON
Hi-BIT/
SAMPLING
MULTI-ROOM
Fine Tuning Your System
3 EXIT should be selected (if it
isn't use the 5∞ buttons to
select it) and press ENTER.
PRO LOGIC LOUDNESS MIDNIGHT TONE DNR
SIGNAL Neo :6
AUTO DIGITAL
RF DTS ES EX
MPEG AAC
DIGITAL
ANALOG STEREO
DSP
SB CH
ON MOVIE
AUTO
OFF MUSIC
L C
R LFE
L S S R S SP A B
Dynamic Range Control is set. Go on to the next
setting.
You may need to experiment with different Dolby
Digital and DTS sources before you can use the
DYNAMIC RANGE CONTROL setting to suit your
low volume listening needs.
4 You are now finished with
EXPERT SETUP, EXIT should be
selected (if it isn't use the 5∞
buttons to select it), press
ENTER.
SIGNAL PRO LOGIC Neo :6 LOUDNESS MIDNIGHT TONE DNR
AUTO DIGITAL
DTS ES EX
RF
MPEG AAC
DIGITAL
STEREO
ANALOG
DSP
SB CH
ON MOVIE
AUTO
OFF MUSIC
L C R LFE
L S R
S S SP A B
5 EXIT should be selected (if it
isn't use the 5∞ buttons to
select it), press ENTER.
6 Use the 5∞ buttons to select
EXIT, press ENTER.
The receiver returns to normal operation.
memo
The default is OFF.
ATT STEREO MONO
dB
TUNED RF ATT
RDS EON
Hi-BIT/
SAMPLING
MULTI-ROOM
ATT STEREO MONO dB
TUNED RF ATT
RDS EON
Hi-BIT/
SAMPLING
MULTI-ROOM
87