Adjusting Bass And Treble (Tone Control) - Pioneer Elite VSX-43TX Operating Instructions Manual

Adjusting Bass and Treble (TONE CONTROL)

You can adjust the low (bass) and high (treble) frequencies. The TONE button can also be used to bypass the
tone circuitry.
RECEIVER
MULTI SYSTEM
OPERATION
MULTI CONTROL
DVD/LD TV / SAT VCR/DVR
VCR 2 C D TUNER
ACOUSTIC
MOVIE MUSIC
SURROUND
SB CH
MODE MODE
STEREO/
DIRECT ENTER MIDNIGHT
MASTER
VOLUME
MENU TUNER EDIT
TUNE
SYSTEM
SETUP
ST
ENTER
AUDIO
TUNE
CHANNEL DTV ON/OFF BAND
D.ACCESS
2
DIMMER LOUDNESS
SIGNAL SEL DNR BASS/TREBLE
VIDEO SEL HI-BIT
3
TV CONTROL
CHANNEL VOLUME
RECEIVER
MULTI JOG CONTROL
SIGNAL HI-BIT SB CH
SET UP RETURN SELECT HI-SAMPLING MODE MIDNIGHT LOUDNESS
TONE CONTROL
PHONES
SPEAKERS TONE BASS/TREBLE
2 3 4
SOURCE
OFF
TV CONT
1
RECEIVER
INPUT
EQ
MULTI CH
INPUT
MUTE
TOP MENU
GUIDE
ST
RETURN
CHANNEL
MPX CLASS
TONE EFFECT/CH SEL
ENTER
DISC
4
10
SUB TITLE
REMOTE
SETUP
STATION TUNING TUNER
BAND CLASS SELECT EDIT
MULTI JOG/ENTER
S-VIDEO VIDEO L AUDIO R
VIDEO INPUT
1 Press RECEIVER.
2 Press the TONE button on the
remote control or the front panel to
put the receiver in tone adjust mode.
There are two tone modes TONE: ON and TONE:
BYPASS. The first means the tone functions are active
and also lets you adjust these functions. The second
means the tone controls are being bypassed, and thus
have no effect on the sound.
3 Press the BASS/TREBLE button
repeatedly to select BASS or
TREBLE.
If TONE: BYPASS appears, press the TONE button to
get TONE: ON.
4 Use the +/– buttons to adjust the low
or high frequency levels.
A few seconds after you finish adjusting the tone the
receiver will revert to the sound mode it was in at the
beginning of the process.
memo
• The TONE CONTROL can be adjusted in a range of ±6
dB.
• The TONE CONTROL cannot be set on in THX
CINEMA, MULTI CH IN modes.
• If you set TONE CONTROL on in DIRECT mode the
receiver will switch to STEREO mode.
Basic Operation
49