Description Of Parameters - Siemens SIMATIC ET 200SP Manual

Parameters/address space

4.3 Description of parameters

4.3 Description of parameters
Diagnostics: No supply voltage L+
Enabling of the diagnostics alarm for no or insufficient supply voltage L+.
Diagnostics: Short-circuit to ground
Enabling of the diagnostics in the event of a short-circuit of the encoder supply to ground or
of an input to the encoder supply.
The short-circuit and underflow diagnostics can be activated simultaneously. If both
diagnostics events occur simultaneously, the short-circuit diagnostics is output.
Diagnostics: Overflow
Enabling of the diagnostics when the measured value exceeds the overrange.
Diagnostics: Underflow
Enabling of the diagnostics when the measured value falls below the underrange.
Diagnostics: Wire break
Enabling of the diagnostics if the module has no current flow or has too little current for the
measurement in the range of 4 mA to 20 mA.
The wire break and underflow diagnostics can be activated simultaneously. If both
diagnostics events occur simultaneously, the wire break diagnostics is output.
Measurement type/measuring range
See the section Measurement types and measuring ranges (Page 13).
16
Analog input module AI 2xI 2/4-wire ST (6ES7134-6GB00-0BA1)
Manual, 12/2015, A5E36104399-AA