Editing A Patch - Boss MD500 Owner's Manual

Editing a Patch

You can edit a variety of patch-related parameters.
1
Press the [EDIT] button.
2 Use the [ H ] [ I ] buttons to select "PATCH," and then press the
[EDIT] button.
Use the [ H ] [ I ] buttons to select a parameter, and use the [RATE/
3
VALUE] knob to edit the value.
4
Press the [EXIT] button to return to the top screen.
* Save the edited patch as described in the procedure on "Saving a Patch" (p. 9).
Basic [EDIT] operations
[EDIT] button
Use the [ H ] [ I ] buttons
to move the cursor
8
[EDIT] button
[EXIT] button
Use the [ H ] [ I ] buttons to move the cursor
Use the [RATE/VALUE] knob to edit the value