Saving A Patch - Boss MD500 Owner's Manual

Saving a Patch

Here's how to save a patch that you've edited.
1
Press the [EXIT] button and [EDIT] button simultaneously.
2
Use the [RATE/VALUE] knob to select the save-destination
number.
Bank [A] switch
Bank 01 01A
Bank 02
02A
: :
Bank 99 99A
* Patch C can be selected only if FSW MODE (p. 22) is set to "A/B/C. "
Press the [ H ] button to select the patch name.
3
4
Edit the patch name.
[ H ] [ I ] buttons
[RATE/VALUE] knob
5
Press the [EDIT] button to save the patch.
If you decide to cancel, press the [EXIT] button.
By moving the cursor to "WRITE TO" and turning the [RATE/VALUE] knob, you can initialize a
patch (INIT) or exchange patches (EXCHANGE).
[B] switch [TAP/CTL] switch
01B 01C
02B 02C
: :
99B 99C
Move the cursor
Edit the character
9