Using The Unit Safely; Important Notes - Boss MD500 Owner's Manual

USING THE UNIT SAFELY

Keep small items out of the reach of children
To prevent accidental ingestion of the parts listed
below, always keep them out of the reach of small
children.
• Included Parts
Rubber feet (p. 2)

IMPORTANT NOTES

Power Supply: Use of Batteries
• Batteries should always be installed or replaced before
connecting any other devices. This way, you can prevent
malfunction and damage.
• If operating this unit on batteries, please use alkaline batteries.
Repairs and Data
• Before sending the unit away for repairs, be sure to make
a backup of the data stored within it; or you may prefer to
write down the needed information. Although we will do our
utmost to preserve the data stored in your unit when we carry
out repairs, in some cases, such as when the memory section
is physically damaged, restoration of the stored content may
be impossible. Roland assumes no liability concerning the
restoration of any stored content that has been lost.
Additional Precautions
• Any data stored within the unit can be lost as the result of
equipment failure, incorrect operation, etc. To protect yourself
against the irretrievable loss of data, try to make a habit of
creating regular backups of the data you've stored in the unit.
• Roland assumes no liability concerning the restoration of any
stored content that has been lost.
• Never strike or apply strong pressure to the display.
• Do not use connection cables that contain a built-in resistor.
30
Intellectual Property Right
• This product contains eParts integrated software platform of
eSOL Co.,Ltd. eParts is a trademark of eSOL Co., Ltd. in Japan.
• Roland, BOSS, and SLICER are either registered trademarks or
trademarks of Roland Corporation in the United States and/or
other countries.
• Company names and product names appearing in this
document are registered trademarks or trademarks of their
respective owners.
• The product names mentioned in this document are registered
trademarks or trademarks of their respective owners. In this
manual, these names are used because it is the most practical
way of describing the sounds that are simulated using COSM
technology.