Playing; Selecting A Patch; About The Play Screen - Boss GT-1000CORE Owner's Manual

Playing

Selecting a Patch

A combination of effects and their settings is called a "patch. "
User patch (U001–U250)
Can be overwritten
Patch
Preset patch (P001–P250)
Cannot be overwritten, however, you can write
a Preset patch into the User area, modify the
settings to your needs and store your modified
version in the User area.
1. Use the [ I ] switch or [ H ] switch to select a patch.
Patch Number
MEMO
You can also change patches by turning knob [SELECT] below
the display.

About the Play Screen

The screen that appears after you turn on the power is called the
"Play screen. "
The following four types of play screen are provided; use the
PAGE [ K ] [ J ] buttons to switch between the types of display.
Large patch number
Large patch name
Show functions assigned to switches of this unit
4
Patch name
MEMO
When the screen at left
is shown, you can press
the PAGE [ K ] [ J ] buttons
simultaneously to edit the
functions that are assigned to
the switches of the unit.
Use the [SELECT] knob to
select the switch that you
want to edit, and then press
the [SELECT] knob to select
the function.
To return to the previous
screen, press the PAGE [ K ] [ J ]
buttons simultaneously once
again.
Show effect configuration
Icons shown in the play screen
Areas which icons are displayed
Indication Explanation
Indicates the input level.
Indicates the output level.
Indicates the return level.
Indicates the send level.
Indicates the amount of compression when the
compressor is operating.
Indicates the BPM.
,
Blinks in time with the BPM.
Indicates the page to which you navigate using the
PAGE [ K ] [ J ] buttons (edit screen).
MEMO
You can change the parameters that are adjusted by knobs [1]–
[5] when the play screen is shown.
For details, refer to the "Assigning Favorite Parameters to [1]–[5]
Knobs" (p. 9).