Switching Banks/Patches - Boss MD500 Owner's Manual

Basic Operation

Switching Banks/Patches

1
Switch banks (01–99).
Bank down (press the [A] and [B] switches simultaneously)
2
Press a blinking switch ([A] or [B]) to switch patches.
Blinking blue
MEMO
You can recall a different patch by turning the [RATE/VALUE]
knob while you hold down the [EXIT] button.
MEMO
You can change the functions that are controlled by the [A], [B], and [TAP/CTL] switches; for
example, you can make the [A] switch turn effect on/off.
6
Bank up (press the [B] and [TAP/CTL] switches simultaneously)