Table of Contents
Advertisement
Related
Documentation
Mounting an EX4550 Switch on Four Posts in a Rack or Cabinet
Copyright © 2017, Juniper Networks, Inc.
Figure 46: Mounting the Switch on Two Posts in a Rack
Mounting rack
Have a second person secure the switch to the rack by using the appropriate screws.
7.
Tighten the screws using the appropriate screwdrivers.
Ensure that the switch chassis is level by verifying that all screws on one side of the
8.
rack are aligned with the screws on the other side.
NOTE:
We recommend that you install cover panels in unused module slots
and dust covers in unused SFP/SFP+ ports.
Connecting Earth Ground to an EX Series Switch on page 151
Connecting AC Power to an EX4550 Switch on page 157
Connecting DC Power to an EX4550 Switch on page 159
Connecting and Configuring an EX Series Switch (CLI Procedure) on page 181
Connecting and Configuring an EX Series Switch (J-Web Procedure) on page 184
Mounting an EX4550 Switch in a Recessed Position in a Rack or Cabinet on page 147
Rack-Mounting and Cabinet-Mounting Warnings on page 270
You can mount an EX4550 switch on four posts in a 19-in. rack or cabinet by using the
separately orderable four-post rack-mount kit. (The remainder of this topic uses rack to
mean rack or cabinet.)
Chapter 12: Installing the Switch
Mounting bracket
143
Advertisement
Table of Contents
