Packing - Martin MAC Encore Performance CLD Safety And Installation Manual

Tilt lock
Release the tilt lock before applying power to the fixture.
See Figure 1. Release the tilt lock by pushing the lock in
towards the yoke (you can reapply the tilt lock by first
checking that the power is off and then pushing the lock
back in towards the yoke from the other side).

Packing

Important! Allow the fixture to cool and release the tilt lock
before packing it in its flightcase.
A rugged two-unit flightcase (see Figure 2) is available
from Martin® for the MAC Encore™. The flightcase
accepts two durable molded SIP (Superior Impact
Protection) foam inserts that are supplied in cardboard boxes with fixtures if you select the SIP option at
time of ordering.
The SIP inserts are designed to protect the head without the tilt lock (see Figure 1) applied. Release the tilt
lock before putting a fixture into a flightcase for transport. Leaving the tilt lock applied may cause damage
that is not covered by the product warranty.
8
Figure 2: Martin® flightcase for the MAC Encore
MAC Encore™ Performance Safety and Installation Manual
Figure 1: Tilt lock