Preparations For Jacking - Dodge Challenger 2016 Operating Information Manual

2. Lift the access cover using the pull strap.
Opening The Access Panel
3. Remove the fastener securing the spare tire.
Spare Tire Fastener
278
4. Remove the spare tire.
5. Remove the fastener securing the jack.
Jack Fastener
6. Remove the jack and lug wrench assembly
from under the spare tire. Turn the jack screw
to the left to loosen the lug wrench, and
remove the wrench from the jack assembly.
WARNING!
A loose tire or jack thrown forward in a
collision or hard stop could endanger the
occupants of the vehicle. Always stow the
WARNING! (Continued)
jack parts and the spare tire in the places
provided. Have the deflated (flat) tire re-
paired or replaced immediately.

Preparations For Jacking

1. Park the vehicle on a firm, level surface as
far from the edge of the roadway as pos-
sible. Avoid icy or slippery areas.
WARNING!
Do not attempt to change a tire on the side of
the vehicle close to moving traffic, pull far
enough off the road to avoid being hit when
operating the jack or changing the wheel.
2. Turn on the Hazard Warning flasher.
3. Set the parking brake.
4. Place the gear selector into PARK (auto-
matic transmission) or 1st gear (manual
transmission).
(Continued)