Customer Programmable Features - Uconnect 8.4 Settings - Dodge Challenger 2016 Operating Information Manual

selected a pop-up will appear asking "Are you
sure you want to reset your settings to default?"
select "Yes" to restore, or "Cancel" to exit.
Clear Personal Data
After pressing the "Clear Personal Data Set-
tings" button on the touchscreen the following
settings will be available:
• Clear Personal Data
When this feature is selected it will remove all
personal data including Bluetooth devices and
presets. To remove all personal information,
press the "Clear Personal Data" button and
select from "Yes" or "No." If "Yes" is selected a
pop-up will appear asking "Are you sure you
want to clear all personal data?" select "Yes" to
Clear, or "Cancel" to exit.
System Information
After pressing the "System Information" button
on the touchscreen the following information will
be available:
• System Information
When System Information is selected, a System
Information screen will appear displaying the
system software version.
Customer Programmable Features
— Uconnect 8.4 Settings
Press the "Apps " button, then press the
"Settings" button on the touchscreen to display
the menu setting screen. In this mode the
Uconnect system allows you to access pro-
grammable features that may be equipped such
as Display, Units, Voice, Clock, Safety & Driving
Assistance, Lights, Doors & Locks, Auto-On
Comfort, Engine Off Options, Audio, Phone/
Bluetooth, Restore Settings, Clear Personal
Data and System Information.
NOTE:
• Only one touchscreen area may be se-
lected at a time.
• Depending on the vehicles options, fea-
ture settings may vary.
When making a selection, press the button on
the touchscreen to enter the desired mode.
Once in the desired mode, press and release
the preferred setting "option" until a check-mark
appears next to the setting, showing that setting
has been selected. Once the setting is com-
plete, either press the Back Arrow button on the
touchscreen to return to the previous menu, or
press the "X" button on the touchscreen to close
out of the settings screen. Pressing the Up or
Down Arrow button on the right side of the
screen will allow you to toggle up or down
through the available settings.
Display
After pressing the "Display" button on the touch-
screen the following settings will be available:
• Display Mode
When in this display you may select one of the
display mode settings. To change Mode status,
press and release the "Manual" or "Auto" button
on the touchscreen.
• Display Brightness With Headlights ON
When in this display, you may select the bright-
ness with the headlights on. Adjust the bright-
ness from (1–10) with the "+" and "–" buttons on
the touchscreen.
165