Huawei OceanStor VIS6000 series Initial Configuration Manual page 64

4 Configuring Basic Services
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
4-2
This section introduces the procedure for initializing a disk.
4.13 Creating a Disk Group
This section introduces the procedure for creating a disk group.
4.14 Creating an Ordinary Volume
This section introduces the procedure for creating an ordinary volume.
4.15 Creating a Thin Provision Volume
This section introduces the procedure for creating a thin provision volume.
4.16 Creating a Host Group
This section introduces the procedure for creating a host group.
4.17 Adding a Host
This section introduces the procedure for adding a host.
4.18 Setting Up the Connection Between the AS and the VIS6000
This section introduces the procedure for setting up the connection between the AS and the
VIS6000.
4.19 Enabling the CHAP Authentication
This section introduces the procedure for enabling the CHAP Authentication.
4.20 Installing and Configuring the Multi-Path Software
This section introduces the procedure for installing and configuring the multi-path software.
4.21 Adding an Initiator
This section introduces the procedure for adding an AS interface to the VIS6000.
4.22 Adding a Mapping
This section introduces the procedure for adding a mapping.
4.23 Using a Volume on an AS
This section introduces the procedure for using a volume on an AS.
4.24 Setting the Maintenance Information About the VIS6000
This section introduces the procedure for setting the maintenance information of the
VIS6000.
4.25 Related Operations
4.26 Parameter Description
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OceanStor VIS6000 Series Virtual Intelligent Storage
System
Initial Configuration Guide
Issue 08 (2010-05-10)