Huawei OceanStor VIS6000 series Initial Configuration Manual page 121

OceanStor VIS6000 Series Virtual Intelligent Storage
System
Initial Configuration Guide
Context
When adding an interface, make sure that the VIS6000 is already connected to the AS. If the
VIS6000 is not connected to the AS, no available interface will be displayed in the management
software.
If the interface is an iSCSI interface, adding an interface refers to adding an iSCSI initiator.
l
If the interface is an FC interface, adding an interface refers to adding the WWN of the
l
interface.
Procedure
Step 1 In the navigation tree, click the Logical tab.
Step 2 Select the host to which an initiator is to be added.
Step 3 On the menu bar, choose Configuration > Initiator Management....
The Properties dialog box is displayed, as shown in
TIP
Issue 08 (2010-05-10)
CAUTION
You can also go to the Properties dialog box by the following two methods:
On the toolbar, click
l
Click the right mouse button, and choose Initiator Management... from the shortcut menu.
l
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure
.
4 Configuring Basic Services
4-54.
4-59