OceanStor VIS6000 Series Virtual Intelligent Storage
System
Initial Configuration Guide
Figure 6-7 Add Timing Policy dialog box
Step 7 For descriptions of the parameters for setting a timing policy, see
Adding a Timing
Step 8 Click OK.
The Info dialog box is displayed, stating "Operation succeeded."
Step 9 Click OK.
Step 10 Click Close.
----End
6.2.5 Modifying a Timing Policy
This section introduces the procedure for modifying a timing policy.
Procedure
Step 1 In the navigation tree, click the Logical tab.
Step 2 In the navigation tree, select the Volume node.
Step 3 Select the source volume that has snapshots.
Step 4 Select a snapshot volume of the source volume.
Step 5 On the menu bar, choose Configuration > Snapshot > Timing Policy Management....
The Show Timing Policy dialog box is displayed, as shown in
Step 6 Click Modify....
The Modify Timing Policy dialog box is displayed, as shown in
Issue 08 (2010-05-10)
Policy.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Configuring a Snapshot
6.3.4 Parameter Description:
Figure
6-6.
Figure
6-8.
6-15