Querying A Timing Policy; Deleting A Timing Policy; Figure 6-8 Modify Timing Policy Dialog Box - Huawei OceanStor VIS6000 series Initial Configuration Manual

6 Configuring a Snapshot

Figure 6-8 Modify Timing Policy dialog box

Step 7 For descriptions of the parameters for modifying a timing snapshot policy, see
Description: Modifying a Timing
Step 8 Click OK.
The Info dialog box is displayed, stating "Operation succeeded."
Step 9 Click OK.
Step 10 Click Close.
----End

6.2.6 Querying a Timing Policy

This section introduces the procedure for querying a timing policy.
Procedure
Step 1 In the navigation tree, click the Logical tab.
Step 2 In the navigation tree, select the Volume node.
Step 3 Select the source volume that has snapshots.
Step 4 Select a snapshot volume of the source volume.
Step 5 On the menu bar, choose Configuration > Snapshot > Timing Policy Management....
The Show Timing Policy dialog box is displayed, as shown in
Step 6 For descriptions of the parameters for viewing information about the Show Timing Policy dialog
box, see
----End

6.2.7 Deleting a Timing Policy

This section introduces the procedure for deleting a timing policy.
6-16
6.3.6 Parameter Description: Management of Timing
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OceanStor VIS6000 Series Virtual Intelligent Storage
Policy.
Initial Configuration Guide
6.3.5 Parameter
Figure 6-6.
Policy.
Issue 08 (2010-05-10)
System