Huawei OceanStor VIS6000 series Initial Configuration Manual page 255

OceanStor VIS6000 Series Virtual Intelligent Storage
System
Initial Configuration Guide
l
Before creating a replicate volume group, complete the following operations.
Issue 08 (2010-05-10)
NOTE
The eth number of the GE service port on controller A correponds to that of the GE service port on
controler B, namely, the eth number of the GE service port in the same position on controller A and
controller B is the same. As shown in
service port in the same row is the same.
Interface Card ID 1 and 2
When either the interface card whose ID is 1 or 2 holds the GE port module, the eth
–
number of the GE service port on controller A correponds to that of the GE service port
on controler B, as shown in
GE service ports, you need to set the IP addresses of the GE service ports with the same
eth number in the same network segment.
Table 7-2 Corresponidng relation of the eth number in the interface card whose ID is
1 or 2
Controller A
10/20
11/21
12/22
13/23
When the interface card whose ID is 1 and 2 both hold the GE port module, the eth
–
number of the GE service port on controller A doesn't correpond to that of the GE service
port on controler B, as shown in
the GE service ports, you need to set the IP addresses of the GE service ports with the
same eth number in the same network segment.
Table 7-3 Corresponidng relation of the eth number in the interface card whose ID is
1 and 2
Controller A
10
11
12
13
20
21
22
23
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Configuring the Data Replication Function
Table 7-1,Table 7-2,Table
Table 7-2. When configuring data replication through the
Controller B
10/20
11/21
12/22
13/23
Table 7-3. When configuring data replication through
Controller B
20
21
22
23
10
11
12
13
7-3, the eth number of the GE
7-3