Figure 2-6 Com1 Properties Dialog Box; Figure 2-7 Displayed Cli After The Successful Login Through The Serial Port - Huawei OceanStor VIS6000 series Initial Configuration Manual

OceanStor VIS6000 Series Virtual Intelligent Storage
System
Initial Configuration Guide
4.
Issue 08 (2010-05-10)

Figure 2-6 COM1 Properties dialog box

Press Enter. If the connection is successfully established, the system prompts you to enter
the user name and the password. Enter the correct user name on the right of the system
prompt login as:, and then press Enter. Enter the correct password in Password, and then
press Enter. The system successfully goes to the CLI of the VIS6000, as shown in
2-7.
NOTE
The user names used for the GUI mode are the same with those used for the CLI mode. When
l
logging in to the VIS6000 for the first time, use the super administrator account (user name:
root; password: 123456).
One user can log in to the VIS6000 only once at one time.
l

Figure 2-7 Displayed CLI after the successful login through the serial port

Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Check Before the Configuration
Figure
2-13