Dt-160Ioe (Bridge Satellite Cradle) - Casio DT-X10M10E Hardware Manual

1.3.2 DT-160IOE (Bridge Satellite Cradle)

Views
Back
Top
Front
Table 1.5 Names of parts
No. Part Name
1 USB port
2 RS-232C port
3 RS-422 port
4 AC adaptor jack
5 Wall mount unit
fastening plate
6 Terminal detect switch
7 IR port
8 Power supply terminals
Continue.
Right
This port accepts connection of a USB cable for connection to a computer
for transfer of system data and file data. Use of the USB port requires
installation of a special driver on the PC.
This port accepts connection of an RS-232C cable for connection to a
computer for transfer of system data and file data. Use of the RS-232C port
requires installation of a special driver on the PC.
This port is used when connecting to another Bridge Satellite Cradle.
Connect the AC adaptor here.
The holes in this plate accept screws that secure the wall mount unit in place.
This switch detects when the Handheld Terminal is not seated correctly on
the Bridge Satellite Cradle.
This port transfers data with the Handheld Terminal IR port non-contact data
communication.
Power is supplied to the Handheld terminal via these contacts.
13
Bottom
Fig. 1.4
Description