Table of Contents
Advertisement
Weight/Dimensions
Table 2.3
In desktop state
Weight
In wall mount state
In desktop state
Dimensions
In wall mount state
2.3 DT-167CHGE (Car Mounted Battery Charger)
Table 2.4
Display
Status LED
Input
Detection switch for DT-X10
Input from
power adaptor
Power
Charge/supply
power
Weight/Dimensions
Table 2.5
Weight
Dimensions
Power supply terminals
Approx. 490 g
Approx. 650 g
Approx. 110 (W) x 139 (D) x 129 (H) mm
Approx. 110 (W) x 148 (D) x 153 (H) mm
Item
No. of LEDs
No. of display colors
Display content
Indicates the status of terminal being mounted on the charger.
OFF
: Power is OFF.
Flashing in green
Flashing in red
Input voltage
Consumption current
Plug
Power cord
Output voltage
Output current
Charge method
Charge time
Power supply terminals
Approx. 755 g
Approx. 119 (W) x 267 (D) x 123 (H) mm
20
GND
Power supply
terminals
Specification
Specification
1
2
Power status ("POWER")
: Power is ON and the terminal is mounted on the charger.
: Power is ON but the terminal is not mounted on the charger.
Push switch
DC 12V/24V±5%
DC 12V : Approx. 1,400 mA
DC 24V : Approx. 700 mA
EIAJ RC-5320A Class 4
DT-827CAC
DC 5V±10%
2,500 mA (maximum)
Constant voltage
Approx. 2.5 hours
Approx. 5.0 hours
Power supply
GND
terminals
Specification
The illustration of
the power supply
terminals on the left
is viewed at the
front of the cradle.
Remark
Remark
In red and green
While supplying
power.
Center: plus
With curb function
on current
For DT-5023BAT
For DT-5025LBAT
The illustration of
the power supply
terminals on the left
is viewed at the
front of the charger.
Remark
Advertisement
Table of Contents
