Table of Contents
Advertisement
Serial interface
Standard
Transmission speed
Audio
PC card (applicable to DT-X10M10E)
Specification
Supply current
Wireless LAN interface (applicable to DT-X10M10RC and DT-X10M10RC2)
Frequency category
Standard
Modulation
Frequency band
Transmission speed
Communication range
No. of channels
Other features
CF card interface
Card type
Supply current
Power
Operating power
Memory backup power Lithium secondary batter x 1pc
Battery life
Memory backup by
Lithium-ion battery
pack
Memory backup by
only Lithium secondary
battery
Memory backup
battery charge time
Power consumption
Buzzer
Sound pressure
Weight
Dimensions
Notes:
1.
A font that can be used to print characters of any size.
2.
Concurrent use of Wireless LAN communication with Bluetooth communication is not recommended.
3.
Each memory backup period will depend on the characteristic of terminal itself, the surroundings including
temperature, humidity. Thus, the periods described in Table 4.1 are recommended for use for reference
only. They are not guaranteed figures.
4.
Backup for both data in RAM and the RTC (built-in clock) will commence when the battery pack (either
DT-5023BAT or DT-5025LBAT) runs down.
USB slave
12 Mbps (Max.)
Earphone output, Microphone
input
PC card Type I/II (3.3V/5.0V)
450 mA (5.0V), 500 mA (3.3V)
ISM
IEEE802.11b
Direct Sequence ("DS")
2,400 MHz to 2,483.5 MHz
11 Mbps (Maximum)
Indoor 50 m, Outdoor 150 m
13 (ETSI)
Roaming within multiple
Access-Points
CF card Types I/II (3.3V)
500 mA (3.3V) maximum
Lithium-ion battery pack x 1pc
Approx. 8 H (DT-5023BAT)
Approx. 18 H (DT-5025LBAT)
Approx. 4 H (DT-5023BAT)
Approx. 10 H (DT-5025LBAT)
DT-5025LBAT
2 weeks
DT-5023BAT
1 week
10 minutes for data in RAM
2 weeks for built-in clock
4 days
DC2.5A/ DC3.7 to 5.0V
70 dB or greater
Approx. 360 g
Approx. 410 g
Approx. 220(D) x 77(W) x 47 (H) mm
18
Connector: USB mini-B 5-pin
φ2.5
Constant supply current values
See note 2
The range may vary depending on the
environment.
3 channels for concurrent use.
CF extension slot (Option)
DT-5023BAT or DT-5025LBAT
Built-in, not replaceable 50mAH
Assuming; wait:calculation:scanning 20:1:1
Assuming; wait : scanning : wireless LAN
operation 13:3:4
See note 3.
Under conditions with room temperature and
memory backup battery fully charged
See note 4.
A period required to charge the memory backup
battery with DT-5023BAT (or DT-5025LBAT)
being installed in the terminal.
DT-X10M10E
DT-X10M10RC/M10RC2
Advertisement
Table of Contents
