Table of Contents
Advertisement
Charging the Battery Pack
Battery pack installed in the terminal can be charged using either cradle, battery
charger or AC adaptor (AD-S42120C). Battery charge condition can be monitored with
Indicator 1 on the terminal. Multiple battery packs can also be charged simultaneously
using Dual Battery Charger.
USB Cradle/Ethernet Cradle/Cradle-type Battery Charger
When inserting the IT-9000 into the cradle, push it in so that the mount hooks engage
the mount holes in the IT-9000. To remove the IT-9000, press the removal button.
Status of Indicator 1 on IT-9000:
Orange: Charging
Red:
Standby due to battery pack error or the surrounding temperature is out of the
charging temperature range
(charging begins when the temperature is within the charging temperature range)
Green:
Charging complete
Car Mounted-type Battery Charger
Plug in the Car Power Cable accompanied in the box to the Car Mounted-type Battery
Charger as illustrated below and the other end to the cigarette lighter socket in vehicle.
Status of Indicator 1 on IT-9000:
Refer to "USB Cradle/Ethernet Cradle/Cradle-type Battery Charger" above.
E-25
Advertisement
Table of Contents
