Software Upgrade Examples; Software Upgrade Example (For Standalone Mode); Software Upgrade Example (For Irf Mode) - HP FlexFabric 7900 Series Configuration Manual

Software upgrade examples

Software upgrade example (for standalone mode)

Network requirements
As shown in
Figure 31 Network diagram
TFTP client
1.1.1.1/24
Device
Configuration procedure
# Configure IP addresses and routes. Make sure the device and the TFTP server can reach each other.
(Details not shown.)
# Complete TFTP settings on both the device and the TFTP server. (Details not shown.)
# Display information about the current software images.
<Sysname> display version
# Use TFTP to download the image file 7904.ipe from the TFTP server to the root directory of the flash on
the MPU.
<Sysname> tftp 2.2.2.2 get 7904.ipe
# (Optional.) Back up the image file to 7904-backup.ipe. Skip this step if the flash does not have
sufficient space.
<Sysname> copy 7904.ipe 7904-backup.ipe
# Specify 7904.ipe as the main startup image file for the MPU.
<Sysname> boot-loader file flash:/7904.ipe slot 0 main
# Specify 7904-backup.ipe as the backup startup image file for the MPU.
<Sysname> boot-loader file flash:/7904-backup.ipe slot 0 backup
# Verify the startup image settings.
<Sysname> display boot-loader
# Reboot the device to complete the upgrade.
<Sysname> reboot
# Verify that the device is running the correct software.
<Sysname> display version

Software upgrade example (for IRF mode)

Network requirements
As shown in
Figure 31, use the file 7904.ipe to upgrade software images for the device.
Internet
Figure 32, use the file 7904.ipe to upgrade software images for the IRF fabric.
TFTP server
2.2.2.2/24
103