Installing A Device Driver (Dd) For The 3095 Engineering Assistant For Fieldbus - Emerson Rosemount 3095 Reference Manual

Rosemount 3095 MultiVariable
Installing a Device Driver
(DD) for the3095
Engineering Assistant
for Fieldbus
5-14
If, after you scan the Fieldbus segment, an "Unable to read the device tag"
message appears on the screen, make sure the necessary device driver (DD)
is installed.
To install a Fieldbus DD for National Instruments:
1. Save DD (.ffo, .sym files) to local computer, if necessary.
2. Close the Engineering Assistant application and NI-FBUS.
3. Start the NI Interface Configuration Utility.
Reference Manual
00809-0100-4716, Rev JA
May 2008